Coral Power Trace-A is a blend of strontium (50,000 ppm) and barium. Strontium in natural sea water is in the order of 8-10ppm. Keeping strontium at this level is advisable and not outside the range of 5-15ppm. Anecdotal evidence has shown that strontium at below 5ppm in the marine aquarium is detrimental to coral growth. For the advanced aquarist strontium levels in marine tanks should be checked regularly to determine the take up in your system. Calculate strontium usage by testing regularly, then simply calculate dosing requirements to suit the depletion rate. Then continue a check of the strontium levels every week or two.
Dosage rate: We recommend dosing 2 drops (0.1ml)/day for each 100L of tank water. If the results are good and depending on the coral density in your tank you can increase steadily to 3 drops (0.15ml)/day over a period of a month or so. Do not dose higher than 4 drops (0.2ml)/day for each 100L of water in a heavily stocked system.
For the advanced aquarist 0.1ml (2 drops) will raise the strontium levels by 0.05 ppm (mg/L) for each 100L of tank water. If you know the strontium depletion rate then dose accordingly as per above.